•
TouseTrackertotransferacalltoaparkorbitforretrievaland
transmitthecall’s park orbit code and caller ID information (if
available),
1. ANSWER call AND SELECT
TRANS
.
2. DIAL extension number.
3. If the called station does not answer or is busy, SELECT
TRACK
.
4. HEAR confirmation beep (Tracker page accepted) OR HEAR
busy tone (Tracker page not accepted).
5. PRESS SPEAKER button to end.
•
To retrieve a call that you parked using the Tracker option,
1. PRESS HOLD button to scroll your held calls, (display shows
PAGE
and extension number of each parked call).
2. PRESS TAP to retrieve the displayed parked call.
• If you receive a parked call message on your Tracker pager,
1. GO to any system station.
2. PRESS INTERCOM.
3. DIAL Tracker pager orbit code (
#800 to #899 ).
4. RETRIEVE call.
•
To enable or disable a Tracker pager at your station,
1. PRESS INTERCOM.
2. DIAL
#07 to enable, OR DIAL #06 to disable.
3. PRESS SPEAKER to end.
LCD Speakerphone Station User’s Guide 67
GCA70-258 Other Advanced Features
To Next Page
Loading...
