CONCORD HANDILIFT - External Door Closer Adjustment

NEVER ALLOW A
DOORS.
VER ALLOW A
DOORS.
CONTRACTOR TO INSTALL YOUR
8) , install the fascias between the landings, as required
uipped with an external door closer that may require site adjustment. The door
loser is a two-speed closer with adjustments for both “sweep” and “latching” speeds. These
ep and latch)
re controlled by two (2) separate speed adjusting valves.
Alwa
CONTRACTOR TO INSTALL YOUR
8) , install the fascias between the landings, as required
uipped with an external door closer that may require site adjustment. The door
loser is a two-speed closer with adjustments for both “sweep” and “latching” speeds. These
ep and latch)
re controlled by two (2) separate speed adjusting valves.
Alwa
When the door frames are complete
to meet local codes.
When the door frames are complete
to meet local codes.
26
XTERNAL DOOR CLOSER ADJUSTMENT XTERNAL DOOR CLOSER ADJUSTMENT EE
A full-height door is eq A full-height door is eq
cc
adjustments are made on the closer on the hinge side of the door. The closing “arcs” (sweadjustments are made on the closer on the hinge side of the door. The closing “arcs” (swe
aa
ys adjust the “sweep” speed first, then adjust the “latching” speed. ys adjust the “sweep” speed first, then adjust the “latching” speed.
NOTE NOTE
The threaded rod and adjustment arm must be adjusted perpendicularly to the door frame.
See Figure # 16.
Figure # 15 Positioning of Pro-Door and Frame