4
TOOLS and MATERIALS REQUIRED
Standard Mechanics Tools to Include:
• Set of Mechanical Sockets and Wrenches (1/4" - 1 1/4" Imperial Sizes)
3/8" Reversible Hand Drill (Variable Speed)
H
D
T
W
Vise-Grip Pliers
P
Extension Power Cord (Minimum 50 feet) (for power tool use)
V
H
aterials Required:
Coated Steel Shim
A
w
W locks and hall stations and minimum 14 gauge for power
supply.
NOTE
• Adjustable Wrench (Minimum 10")
• Screwdrivers (Slotted and Phillips)
• 4'-0" Carpenter’s Level and Square
• Allen Wrenches (Keys) (1/8" - 3/8" Imperial)
•
• and Dolly
rill Bits •
• ape Measure
• ire Strippers
•
• ry Bar
•
• olt-Ohm Meter (V.O.M.)
• ammers and Mallets
M
•
s, minimum 4" (100 mm) square
nchors - For a concrete base, use 1/2" (13 mm) diameter x 2 1/2" (64 mm) long anchors and for•
ood flooring use 1/2" (13 mm) diameter x 2 1/2" (64 mm) long lag bolts.
• iring - Minimum 20 gauge stranded for
There may be other tools required to complete your installation.
To Next Page
Loading...