CONCORD HANDILIFT - Installation Safety Tips

THE FOLLOWING SAFETY INSTRUCTIONS SHOULD BE
FOLLOWED AT ALL TIMES. PRACTICE SAFETY FIRST.
S
e f
ntire unit and carefully follow all procedures.
n
Power should be removed from the driv nd operating systems when any electrical
only recommended anchor fasteners.
w workers and their safety.
s,
parts, etc.).
Always remember and practice,
SAFETY FIRST.
IN TALLATION SAFETY TIPS
Th ollowing safety installation tips must always be followed. Please read and understand this
manual before installing thee
1) Proper safety approved protection for your head, eyes, hands, and feet should be wor
during all phases of the installation.
) Use extreme caution while raising lift components into position to avoid personal injury or 2
damage to the equipment.
3) Use extreme care when operating units without panels in place to avoid personal injury
from moving parts.
4) e unit a
work or adjustments are being done.
5) To avoid possible electrical shock, you should not work on a wet floor.
6) Use
7) You should never work alone and always be aware of fello
8) Do not wear loose clothing during installation. Shirt cuffs should be buttoned to avoid
being caught in moving machinery.
9) Ensure that all electrical and mechanical equipment is properly enclosed.
10) Never place yourself in a position where you may be harmed (i.e., between shear point
under heavy objects, in the path of moving
11)
IT IS RECOMMENDED YOU READ AND FULLY
UNDERSTAND T
THE INSTALLAT
HIS MANUAL BEFORE BEGINNING
ION OF THE HANDILIFT.
5