Figure # 11 Portable Handilift Unit (Optional)
20
PORTABLE HANDILIFT UNIT (OPTIONAL)
he Portable Handilift is shipped without its four wheels to accommodate packaging. The two (2) rigid
obstr dified to fit over the arms of the portable-base, front wheel assembly. The
o (2) swivel or rotating 8" (203 mm) wheels attach to the portable-base, rear lifting assembly. See
lide both sets of metal arms on the portable-base front wheel assembly and the portable-base rear
requi
mm) x 1" (25 mm) bolts, washers and nuts.
ft Unit upwards, turn the hand cranks clockwise. To move the Portable
andilift Unit downwards, turn the hand cranks counter-clockwise.
T
6" (152 mm) wheels are attached to the portable-base, front wheel assembly. The under-platform
uction sensor plate is mo
tw
Figure # 11.
S
lifting assembly into the metal arms connected to the base of the tower assembly. Align the holes, as
red. Bolt all the arms together with the three supplied sets of 3/8"
(9
To move the Portable Handili
H
To Next Page
Loading...