3B1
1-1-7
· TAD/Auto Rx. key*
1
.........................
Press the TAD/auto Rx. key to change the reception mode. When the TAD indicator
is lit, the fax is in the TAD reception mode. When the auto Rx. indicator is lit, the fax
is in the auto fax reception mode. When both indicators are turned off, the fax is in
the manual fax reception mode.
TAD/manual Rx. key*
2
...................
Press the TAD/manual Rx. key to change the reception mode. When the TAD
indicator is lit, the fax is in the TAD reception mode. When the manual Rx. indicator is
lit, the fax is in the manual fax reception mode. When both indicators are turned off,
the fax is in the auto fax reception mode.
‚ Duplex Tx. key .......................... Press the duplex Tx. key to transmit double-sided documents.
ΠBroadcast key ........................... Press the broadcast key to start broadcast transmission.
„ Print reports key ........................ Press the print reports key to output reports and lists.
´ Information key.......................... Press the information key to check transmission and reception results. The last 10
communication results can be checked on the message display. Also press this key
to cancel or change the details of programmed transmission that are stored in the
memory.
‰ Polling key ................................. Press the polling key to start polling communication.
ˇ Confidential key......................... Press the confidential key to enter documents into an F-code confidential box or print
out documents from an F-code confidential box or an encryption box.
Á Delayed Tx. key ........................ Press the delayed Tx. key to perform timer transmission.
¨ F-code key ................................ Press the F-code key to start F-code based communication.
ˆ Alternate display key ................. Pressing the alternate display key in the dual access mode enables monitoring of
background operation. The screen on the message display switches to that for
background operation while the alternate display key is held down.
*1 : For 120 V specifications.
*2 : For 220-240 V specifications.
To Next Page
