40 Artiglio Master Code User Manual
If operating on a tireless rim, the machine will automatically identify this condition,
arranging the tools to mount the tyre.
The display will go to the relative mounting sequence.
If necessary, see the relative section
.
NOTICE
BEAD BREAKING - DEMOUNTING
WARNING
WARNING
WARNING
KEEP HANDS AND
OTHER BODY
PARTS AWAY
FROM MOVING
PARTS
KEEP FEET
CLEAR OF THE
BEAD BREAKER
AND LIFTER
DO NOT
BREAK THE
BEAD WITH
AIR PRESSURE
IN THE TYRE
All air pressure inside the tyre must be removed before proceeding. Never attempt
to break the bead until all air is removed from the tyre. Failure to remove all air
from the tyre may result in injury to the operator, or damage to equipment, the
tyre or wheel.
WARNING
The machine carries out 3 phases in sequence: top bead
breaking (sequence 2), bottom bead breaking (sequence
3) and tyre demounting (sequence 4).
If necessary the automatic sequence can be interrupted at
any moment pressing the stop button (1).
Subsequently the individual phase can be repeated or you
can proceed in manual mode.
NOTICE
N.B.:
Before beginning bead breaking, position the
inflation valve at 3 o’clock (Fig. 31a). During the
various work phases the machine automatically
directs the position of the valve in order to reduce
the risk of damage to the valve itself.
1
31a
To Next Page
Loading...
