Corghi Artiglio Master Code - Page 52

52 Artiglio Master Code User Manual
- Press the camera button (optional) to facilitate positioning of the bottom bead breaker disc.
- Press the key
(Fig. 34b) to store the wheel dimensions.
Once saving is completed the tool and the bead breakers will make a small move-
ment away from the wheel.
NOTICE
If operating on a tireless rim, the machine will automatically identify this condition, ar-
ranging the tools to mount the tyre.
The display will go to the relative mounting sequence.
Therefore, if necessary go to the relative paragraph
.
NOTICE
BEAD BREAKING
WARNING
WARNING
WARNING
KEEP HANDS AND
OTHER BODY
PARTS AWAY
FROM MOVING
PARTS
KEEP FEET
CLEAR OF THE
BEAD BREAKER
AND LIFTER
DO NOT
BREAK THE
BEAD WITH
AIR PRESSURE
IN THE TYRE
All air pressure inside the tyre must be removed before proceeding. Never attempt
to break the bead until all air is removed from the tyre. Failure to remove all air
from the tyre may result in injury to the operator, or damage to equipment, the
tyre or wheel.
WARNING
The top bead breaker automatically hooks during the descent phase.
1 - Act on the lever and move the disc, taking it to about 5 mm under the rim edge
(Fig. 35a).
WARNING