Page 15
P233E User Group #13 Miscellaneous Options - Default 5
P234E User Group #14 Miscellaneous Options - Default 5
P235E User Group #15 Miscellaneous Options - Default 5
P236E User Group #16 Miscellaneous Options - Default 5
P237E User Group #17 Miscellaneous Options - Default 5
P238E User Group #18 Miscellaneous Options - Default 5
P239E User Group #19 Miscellaneous Options - Default 5
P240E User Group #20 Miscellaneous Options - Default 5
Option 1 Can change telephone #’s - If option 1 is on then the User can enter Client Mode and change the
telephone numbers at addresses P690E-P696E.
Option 2 Can change Clock - This option allows the User to change the panel clock at addresses P678E-P682E
Option 3 Can Print Event Memory - A User with this option can start the event memory printing to a serial printer
if connected via the optional Serial Board. The program address to start printing is P954E.
Option 4 Can Answer an In-coming call - For security reasons, the panel may not be set up to allow automatic
remote access by answering an in-coming call. If this option is on however, the user can access Client
Mode while there is an in-coming call and press P955E to make the panel answer the call. At this point
Upload/download can occur.
Option 5 Can change Their Code - This option allows the User to access Client Mode to change their own code
but they cannot view or change any other codes.
Option 6 Can change All Codes - This option allows the User to access Client Mode to change any of the 100
User codes. If the User has this option assigned they can also start Walk-test Mode (P956E) while in
Client Mode.
Option 7 Can allow access to Installer mode - This option allows the User to access Client Mode and then a
person with the Installer code can access Installer program Mode. If Direct access to installer mode is
turned off at address P601E option 3 then this is the only way to get into installer mode. If the User has
this option assigned they can also start Walk-test Mode (P956E) and RSSI Mode (P570E & P580E)
while in Client Mode.
Option 8 Child Unset Warning - This option assigns the Child Unset Warning to the User. If an Area is armed
in Child Mode using a code or the “A” or “B” buttons with this option assigned and then the alarm is
disarmed by a User with this option assigned, the panel will send an unset report to a designated
telephone number/s. If the alarm is not armed by a User with this option then no report will be generated
on disarming. This option is designed to allow the user to arm the alarm and get a report when the
children have returned home and disarmed the alarm using their code.
USER GROUPS 1-20 RADIO PENDANT OPTIONS P241E-P260E
P241E User Group #1 Radio Pendant Options - Default 0 OPTIONS
P242E User Group #2 Radio Pendant Options - Default 0 1 = Pendant Disabled in Alarm
P243E User Group #3 Radio Pendant Options - Default 0 2 = Immediate Panic Alarm
P244E User Group #4 Radio Pendant Options - Default 0 3 = Delayed Panic Alarm (1.5s)
P245E User Group #5 Radio Pendant Options - Default 0 4 = Spare
P246E User Group #6 Radio Pendant Options - Default 0 5 = Spare
P247E User Group #7 Radio Pendant Options - Default 0 6 = Spare
P248E User Group #8 Radio Pendant Options - Default 0 7 = Spare
P249E User Group #9 Radio Pendant Options - Default 0 8 = Spare
P250E User Group #10 Radio Pendant Options - Default 0
P251E User Group #11 Radio Pendant Options - Default 0
P252E User Group #12 Radio Pendant Options - Default 0
P253E User Group #13 Radio Pendant Options - Default 0
P254E User Group #14 Radio Pendant Options - Default 0
P255E User Group #15 Radio Pendant Options - Default 0
P256E User Group #16 Radio Pendant Options - Default 0
P257E User Group #17 Radio Pendant Options - Default 0
P258E User Group #18 Radio Pendant Options - Default 0
P259E User Group #19 Radio Pendant Options - Default 0
P260E User Group #20 Radio Pendant Options - Default 0
Option 1 Pendant disabled during an alarm - If option 1 is on then a Radio key loaded as a User will be
To Next Page
Loading...
