Page 17
P297E User Group #17 Outputs 1-8 to turn On - Default 0
P298E User Group #18 Outputs 1-8 to turn On - Default 0
P299E User Group #19 Outputs 1-8 to turn On - Default 0
P300E User Group #20 Outputs 1-8 to turn On - Default 0
USER GROUPS 1-20 OUTPUTS TO TURN OFF P301E-P320E
This set of options allow a User code or radio key to control the turning OFF of an Output directly. For this option to
work the options at in the corresponding group at addresses P201E-P220E must be OFF.
P301E User Group #1 Outputs 1-8 to turn Off - Default 0
P302E User Group #2 Outputs 1-8 to turn Off - Default 0
P303E User Group #3 Outputs 1-8 to turn Off - Default 0
P304E User Group #4 Outputs 1-8 to turn Off - Default 0
P305E User Group #5 Outputs 1-8 to turn Off - Default 0
P306E User Group #6 Outputs 1-8 to turn Off - Default 0
P307E User Group #7 Outputs 1-8 to turn Off - Default 0
P308E User Group #8 Outputs 1-8 to turn Off - Default 0
P309E User Group #9 Outputs 1-8 to turn Off - Default 0
P310E User Group #10 Outputs 1-8 to turn Off - Default 0
P311E User Group #11 Outputs 1-8 to turn Off - Default 0
P312E User Group #12 Outputs 1-8 to turn Off - Default 0
P313E User Group #13 Outputs 1-8 to turn Off - Default 0
P314E User Group #14 Outputs 1-8 to turn Off - Default 0
P315E User Group #15 Outputs 1-8 to turn Off - Default 0
P316E User Group #16 Outputs 1-8 to turn Off - Default 0
P317E User Group #17 Outputs 1-8 to turn Off - Default 0
P318E User Group #18 Outputs 1-8 to turn Off - Default 0
P319E User Group #19 Outputs 1-8 to turn Off - Default 0
P320E User Group #20 Outputs 1-8 to turn Off - Default 0
USER GROUPS 1-20 TIME ZONE CONTROL P321E-P340E
This set of options allow a User code or radio key to be controlled by a Time Zone. At any of the addresses below
you can select any or all of the possible 8 time zones. If no time zones are assigned, the code or radio key will work
at all times. If a time zone is assigned, the code or radio key will only work when the time zone is active. By selecting
more than one time zone it is possible to get complex time control for different times during the week eg if TZ#1 was
Mon-Fri, 0830-1700 and TZ#2 was Sat, 0900-1200, you could select time zones 1&2 and both times would control
the code or radio key.
P321E User Group #1 Time Zones 1-8 - Default 0
P322E User Group #2 Time Zones 1-8 - Default 0
P323E User Group #3 Time Zones 1-8 - Default 0
P324E User Group #4 Time Zones 1-8 - Default 0
P325E User Group #5 Time Zones 1-8 - Default 0
P326E User Group #6 Time Zones 1-8 - Default 0
P327E User Group #7 Time Zones 1-8 - Default 0
P328E User Group #8 Time Zones 1-8 - Default 0
P329E User Group #9 Time Zones 1-8 - Default 0
P330E User Group #10 Time Zones 1-8 - Default 0
P331E User Group #11 Time Zones 1-8 - Default 0
P332E User Group #12 Time Zones 1-8 - Default 0
P333E User Group #13 Time Zones 1-8 - Default 0
P334E User Group #14 Time Zones 1-8 - Default 0
P335E User Group #15 Time Zones 1-8 - Default 0
P336E User Group #16 Time Zones 1-8 - Default 0
P337E User Group #17 Time Zones 1-8 - Default 0
P338E User Group #18 Time Zones 1-8 - Default 0
P339E User Group #19 Time Zones 1-8 - Default 0
P340E User Group #20 Time Zones 1-8 - Default 0
INSTALLER CODE - P410E
To Next Page
Loading...
