Page 54
8 = Enabled at All Times
LISTEN-IN via INTERNAL SPEAKER OPTIONS
The internal speaker can be used to listen to the dialler during various On-line states. If this option is not wanted you
must turn off all of the options at this address. It is a very useful tool for testing the dialler on a new installation when
sending signals to monitoring stations or calls to cell-phones, etc as the installer can hear the call being made to
verify correct operation.
P607E Internal Speaker Listen-in Options (Default = None)
1 = Enabled During Dialling in Disarm State only
2 = Enabled During Dialling in Armed State only
3 = Enabled During Dialling in Monitor Mode State only
4 = Enabled Throughout the call in Disarm State only
5 = Enabled Throughout the call in Armed State only
6 = Enabled Throughout the call in Monitor Mode State only
7 = Listen-in Enabled when the panel answers a call
8 = Enabled at All Times
AUTO-ANSWER RING COUNT
P760E 1-99E Auto-Answer Rings - This option defines the number of rings before the panel will auto-answer
the incoming call. (Default = 25)
MAINS FAIL REPORT DELAY
P769E 1-999E Mains (AC) Fail Report Delay - When there is a mains supply failure, the mains must fail for
longer than the programmed delay at this address before the panel will report the alarm. A
value from 1-999 seconds can be programmed as the delay. A value of 0 will result in an
instant report of mains failure. The Local Mains Fail PA message if programmed to report via
the internal speaker will not report locally until this delay has expired.
(Default = 600 seconds)
ZONE ALARM REPORT DELAY
P770E 0-999E Report Delay on Zones - This delay pauses the zone reporting of alarms via the panel for
the programmed period (0 = No delay or 1-999 seconds). If the alarm is reset before this
delay expires no alarms will be reported.
This delay pauses the reporting of zone alarms for all reporting formats. This delay can be used to prevent false
alarms from reporting if the alarm is cancelled before this delay expires.
UPLOAD/DOWNLOAD SECURITY OPTIONS
P605E XXXXXXXX. Up to 8 digit security code for upload/download.
P955E Answer incoming call - provided a user with option 4 set (P221-P240) enters in P955E while in
client program mode and the telephone line is currently ringing the panel will answer the
incoming call and initiate an upload/download connection.
To Next Page
Loading...
