PRINT MODE
Printing mode:
Normal
D
= enables printing in normal writing way
Reverse = enables printing rotated 180 degrees
AUTOFEED
Setting of the Carriage Return character:
CR disabled
D
= Carriage Return disabled
CR enabled = Carriage Return enabled
NOTE: The parameter is printed only with ESC/POS
TM
emulation enabled.
CHARS / INCH
Font selection:
200dpi models 300dpi models
A = 11 cpi, B = 15 cpi
D
A = 16 cpi, B = 23 cpi
D
A = 15 cpi, B = 20 cpi A = 23 cpi, B = 30 cpi
NOTE: CPI = Characters Per Inch
NOTE: The parameter is printed only with ESC/POS
TM
emulation enabled.
SPEED / QUALITY
Setting of printing speed and printing quality:
Normal
D
High Quality
High Speed
AUTOMATIC EJECTING
Setting of the automatic ejecting function of the last printed ticket in presentation mode:
Disabled
D
= ejecting function disabled
Enabled T.out 5s = the ticket is ejected after 5 seconds from the end of printing
Enabled T.out 10s = the ticket is ejected after 10 seconds from the end of printing
Enabled T.out 15s = the ticket is ejected after 15 seconds from the end of printing
Enabled T.out 20s = the ticket is ejected after 20 seconds from the end of printing
Enabled T.out 30s = the ticket is ejected after 30 seconds from the end of printing
Enabled T.out 40s = the ticket is ejected after 40 seconds from the end of printing
Enabled T.out 60s = the ticket is ejected after 60 seconds from the end of printing
Enabled T.out 2m = the ticket is ejected after 2 minutes from the end of printing
PAPER RETRACTING
Setting of the automatic retracting function of the last printed ticket in presentation
mode:
Disabled
D
= “retract” function disabled
Enabled No Timeout = “retract” function enabled and executable with the command
Enabled T.out 5s = the ticket is retracted after 5 seconds from the end of printing
Enabled T.out 10s = the ticket is retracted after 10 seconds from the end of printing
Enabled T.out 15s = the ticket is retracted after 15 seconds from the end of printing
Enabled T.out 20s = the ticket is retracted after 20 seconds from the end of printing
Enabled T.out 30s = the ticket is retracted after 30 seconds from the end of printing
Enabled T.out 40s = the ticket is retracted after 40 seconds from the end of printing
Enabled T.out 60s = the ticket is retracted after 60 seconds from the end of printing
Enabled T.out 2m = the ticket is retracted after 2 minutes from the end of printing
PRINT WIDTH
Width of printing area:
172 mm 184 mm 196 mm
174 mm 186 mm 198 mm
176 mm 188 mm 200 mm
D
178 mm 190 mm
180 mm 192 mm
182 mm 194 mm
5. CONFIGURATION
44 KPM216HII ETH User manual
To Next Page
Loading...
