Custom Audio Electronics KPM216HII-ETH - Page 57

ISOPROPYL ALCOHOL
A
3
Clean the paper input area
by using compressed air.
3
Clean the printing head by using
a non-abrasive cloth moistened with isopropyl.
PRINTING HEAD
1
Disconnect the
power supply cable.
2
Lift up the print head using the
opening slot (A) located on the cover
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
ON
Alcohol, solvent
cohol, solve
ATTENTION:
Do not use solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
6. MAINTENANCE
User manual KPM216HII ETH 57