A
ISOPROPYL ALCOHOL
BUTTON IN
UNLOCKED POSITION
BUTTON IN
LOCKED POSITION
PRINTING ROLL
1
Disconnect the
power supply cable.
2
Remove the side cover by
rotating the lock/unlock.
3
Lift up the print head using the
opening slot (A) located on the cover
4
Clean the dragging roller
by using a soft cloth moistened with isopropyl.
ATTENTION:
Do not use solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
ON
6. MAINTENANCE
58 KPM216HII ETH User manual
To Next Page
Loading...
