Custom Audio Electronics KPM216HII-ETH User Manual

BUTTON IN
UNLOCKED POSITION
BUTTON IN
LOCKED POSITION
A
CUTTER
1
Disconnect the
power supply cable.
2
Remove the side cover by
rotating the lock/unlock.
4
Lift up the autocutter.
3
Lift up the print head using the
opening slot (A) located on the cover
ATTENTION:
Do not touch the head heating line with bare hands or
metal objects.
Do not perform any operation inside the printer immedi-
ately after printing because the head and motor tend to
become very hot.
6. MAINTENANCE
User manual KPM216HII ETH 59

Custom Audio Electronics KPM216HII-ETH Specifications

General

Brand	Custom Audio Electronics
Model	KPM216HII-ETH
Category	Printer
Language	English