EasyManuals Logo

D-Link DSL-2888A User Manual

D-Link DSL-2888A
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
8D-Link DSL-2888A User Manual
Section 2 - Installation
Before you Begin
Installation
This section will walk you through the installation process. Placement of the router is very important for proper operation and best performance.
Note: This installation section is written for users who are setting up their home Internet service with the DSL-2888A Wireless AC1600 Dual-Band
Gigabit ADSL2+/VDSL2 Modem Router for the rst time. If you are replacing an existing DSL modem and/or router, you may need to modify these
steps.
Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, attic, or garage.
Congure the router with the computer that was last connected directly to your Internet connection. Verify that it is connected to the
Internet before connecting additional devices.
If your ISP provided you with a modem/router combo, you will need to set it to “bridge” mode so the router can work properly. Please
contact your Internet Service Provider (ISP) or refer to the user manual for your modem/router device.
If connecting to a DSL modem, make sure to have your DSL service information provided by your Internet Service Provider handy.
This information is likely to include your DSL account's username and password. Your ISP may also supply you with additional WAN
conguration settings which might be necessary to establish a connection.
If you are connecting a considerable amount of networking equipment, it may be a good idea to take the time to label each cable or
take a picture of your existing setup before making any changes.
If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoET, BroadJump,
or EnterNet 300 from your computer or you will not be able to connect to the Internet.

Other manuals for D-Link DSL-2888A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DSL-2888A and is the answer not in the manual?

D-Link DSL-2888A Specifications

General IconGeneral
Ethernet WANYes
SIM card slotNo
WAN connection typeRJ-11
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6E (802.11ax)
Top Wi-Fi standardWi-Fi 6E (802.11ax)
WLAN data transfer rate (max)1600 Mbit/s
WLAN data transfer rate (second band)300 Mbit/s
Networking standardsIEEE 802.11ac, IEEE 802.11az, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11u, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
RJ-11 ports quantity1
USB 2.0 ports quantity2
Ethernet LAN (RJ-45) ports5
Firewall securityDual Active Firewall
Security algorithmsWPA, WPA2, WPS-PBC, WPS-PIN
Product typeTabletop router
Product colorBlack
Antenna type3x3
Antennas quantity3
Output current2 A
Output voltage12 V
AC input voltage100 - 240 V
Power source typeAC
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)10 - 95 %
CertificationCE, FCC, LVD, RCM
Weight and Dimensions IconWeight and Dimensions
Depth37 mm
Width155 mm
Height230 mm
Weight523 g

Related product manuals