21D-Link DSL-2888A User Manual
Section 4 - Conguration
Click the IPv4 button to see the IPv4 information for each WAN interface. Click the green
arrows to select dierent interfaces.
WAN Interface:
Displays the currently selected interface: Ethernet, DSL, or USB.
Cable Status:
Displays the current cable connection status.
Connection Type:
Displays the network protocol used to obtain an IP address.
Network Status:
Displays the current network connection status.
Connection
Uptime:
Displays the amount of time the connection has been connected.
MAC Address:
The WAN interface's MAC address is listed here.
IP Address:
The WAN IP address is listed here.
Default Gateway:
The default gateway IP address is listed here.
Primary DNS
Server:
Displays the current primary DNS server.
Secondary DNS
Server:
Displays the current secondary DNS server.
Internet
COPYRIGHT © 2016 D-Link
DSL-2888A HW:V1.0.0 FW:V1.1.43
Settings Features ManagementHome
Internet DSL-2888A
Connected Clients: 1
USB Device
Internet Connected
Click on any item in the diagram for more information.
DSL/ IPv4 / IPv6
WAN Interface: PTM0 MAC Address: FF:FF:FF:FF:FF:FF
Cable Status: Connected IP Address: 172.17.5.120
Connection Type: Dynamic IP (DHCP) Subnet Mask: 255.255.255.0
Network Status: Connected Default Gateway: 172.17.5.1
Connection Uptime: 1 Day 3 Hour 50 Min 58 Sec Primary DNS Server: 172.17.5.5
Secondary DNS Server: 172.17.5.6
Go to settings
IPv4