63D-Link DSL-2888A User Manual
Section 4 - Conguration
Upgrade
This page allows you to upgrade the DSL-2888A's rmware or language pack, either
automatically or manually. To manually upgrade the rmware or language pack, you must
rst download the relevant le from http://support.dlink.com.
In the Management menu on the bar on the top of the page, click Upgrade.
Upgrade Manually
Upgrade
Firmware:
If you wish to upgrade the firmware manually, first download the
rmware le you wish to upgrade to. Next, click the Upgrade Firmware
button and browse to the le to install the new rmware. You can also
browse to a language pack le to install a new language pack.
DSL-2888A HW:V1.0.0 FW:V1.1.43
Upgrade
Your router can automatically detect rmware updates, but requires your authorization to install them. It is
also possible to check for new rmware manually, upgrade rmware from a local le.
Settings FeaturesHome Management
Management >> Upgrade
Upgrade Manually
Upgrade Firmware:
Select File
COPYRIGHT © 2016 D-Link