D-Link DSL-2888A

38D-Link DSL-2888A User Manual
Section 4 - Conguration
Auto Conguration (SLAAC/DHCPv6)
Select Auto Conguration if your ISP assigns your IPv6 address when your router requests
one from the ISP’s server. Some ISPs require you to adjust settings on your side before your
router can connect to the IPv6 Internet.
IPv6 Settings:
IPv6PD:
Enable or disable IPv6 prex delegation.
My Internet
Connection is:
Select Auto Conguration.
DNS Type:
Select either Obtain DNS server address automatically or Use
the following DNS address.
If you selected Use the following DNS address, the following options are available:
Primary DNS
Server:
Enter the primary DNS server address.
Secondary DNS
Server:
Enter the secondary DNS server address.
Click Save when you are done.
DNS Type: Obtain a DNS server address
⌵
IPv6PD:
Enabled
My Internet Connection is: Auto Conguration
⌵
IPv6 SETTINGS
DNS Type: Use the following DNS
⌵
Primary DNS Server:
Secondary DNS Server:
IPv6PD:
Enabled
My Internet Connection is: Auto Conguration
⌵
IPv6 SETTINGS