D-Link DSL-2888A

27D-Link DSL-2888A User Manual
Section 4 - Conguration
Settings
Wizard
Internet
In the Settings menu on the bar on the top of the page, click Wizard to open the setup wizard. This is the same wizard that appears when you start
the router for the rst time. Refer to Setup Wizard on page 14 for more information.
The following pages will describe how to manually congure how your DSL-2888A connects
to the Internet. The DSL-2888A supports multiple WAN connection types and WAN failover.
We recommend setting up Internet WAN connections one at a time, Save the conguration,
and conrm the connection works before returning to this section to add additional WAN
connections.
The following conguration pages are divided by WAN Access Type.
WAN Access Type:
Select WAN interface to congure. The options are ADSL, VDSL,
Ethernet, or USB.
Select a WAN interface and refer to its conguration page for setup information.
For ADSL, refer to ADSL on page 28.
For VDSL, refer to VDSL on page 29.
For Ethernet, refer to Ethernet on page 30.
For USB, refer to USB on page 31.
DSL-2888A HW:V1.0.0 FW:V1.1.43
Settings >> Internet
SettingsHome Features Management
Internet
Use this section to congure your Internet Connection type. There are several connection types to choose
from Static IP, DHCP, PPPoE, PPTP, L2TP and DS-Lite. If you are unsure of your connection method, please
contact your Internet service provider. Note: If using the PPPoE option, you will need to remove or disable
any PPPoE client software on your computers.
Advanced Settings ...
WAN Access Type:
ADSL
⌵
Interface: ATM 0
⌵
Enable Interface:
Enabled
Priority
Save
DSL Prole
VPI:
VCI:
VLAN Tagged:
Enabled
VLAN ID:
VLAN Priority: Disable
⌵
Encapsulation:
VC MUX
⌵
ATM QoS:
Non Realtime VBR
⌵
Sustainable Cell Rate: undened
Maximum Burst Size:
undened
Minimum Cell Rate:
undened
ISP SETTINGS