40D-Link DSL-2888A User Manual
Section 4 - Conguration
Priority
Internet Fail Over
Primary Internet
Connection:
Select the primary Internet connection to use. The options are PTM_/
ATM_, which is the xDSL connection; Eth_0 and Eth1-Eth5 if enabled,
which are the Ethernet WAN interfaces provided by Residential
Gateway mode; and USB0, which is a USB connected modem.
Secondary
Internet
Connection:
Select the secondary backup, Internet connection to use in the event
the primary Internet connection fails.
Tertitary
Backup Internet
Connection:
Select the third backup, Internet connection to use in the event the
primary and secondary Internet connection fails.
Click Save when you are done.
From this page you may congure your Internet failover priority. In the event that your
primary Internet connection method fails, this device can automatically fall back to using a
secondary or tertiary connection in order to maintain Internet connectivity.
DSL-2888A HW:V1.0.0 FW:V1.1.43
Settings >> Internet >> Priority
SettingsHome Features Management
Priority
Congure your Internet fail over priority. In the event that your primary Internet connection method fails, this
device can automatically fall back to using a secondary or tertiary connection in order to maintain Internet
connectivity. From this page you may congure your Internet failover priority.
Primary Internet Connection PTM0
⌵
Secondary Internet Connection
Eth0
⌵
Tertitary Backup Internet Connection Not Available
⌵
Internet
Save
DSL Prole
Internet Fail Over
COPYRIGHT © 2016 D-Link