D-Link DSL-2888A User Manual

42D-Link DSL-2888A User Manual
Section 4 - Conguration
Wireless (continued)
5 GHz
Status:
Enable or disable the 5 GHz wireless network.
Wi-Fi Name (SSID):
Create a name for your wireless network using up to 32 characters.
Password:
Create a password to use for wireless security.
Advanced Settings
802.11 Mode:
Select the desired wireless networking standards to use. The available
options are 802.11a/n/ac or 802.11a.
Security Mode:
Choose None, WEP, WPA-PSK, WPA2-PSK or WPA-PSK/WPA2-PSK.
Wi-Fi Channel:
Select the desired channel for your wireless network to use. The
default and recommended setting is Auto.
Transmission
Power:
Select the desired wireless transmission power. The available options
are High, Medium, and Low. The default is High.
Channel Width:
Select Auto 20/40 MHz if you want to disable 80 MHz bandwidth
communication for 5 GHz wireless compatibility.
Visibility Status:
The default setting is Visible. Select Invisible if you do not want to
broadcast the SSID of your wireless network.
Note: Making a network Invisible is not a form of security alone.
Wi-Fi Protected Setup
PBC:
Press the Trigger PBC button to trigger WPS-PBC mode. This virtual
WPS button replicates the physical WPS button functionality.
Click Save when you are done.
DSL-2888A HW:V1.0.0 FW:V1.1.43
Settings >> Wireless
SettingsHome
Wireless
Features Management
Use this section to congure the wireless settings for your D-Link Router. Please make sure that any
changes made in this section will need to be updated on your wireless device.
2.4GHz
5GHz
Status:
Enabled
Wi-Fi Name (SSID): 2.4_GHz_Wi-Fi_Network
Password: A_Str0nG_P@ssW0rd!%!
Status:
Enabled
Wi-Fi Name (SSID): 5_GHz_Wi-Fi_Network
Password: A_Str0nG_P@ssW0rd!%!
Advanced Settings ...
Advanced Settings ...
Multiple SSID
Save
802.11 Mode: 802.11b/g/n
⌵
Security Mode: WPA-PSK/WPA2-PSK
⌵
Wi-Fi Channel: Auto
⌵
Transmission Power: High
⌵
Channel Width:
20 MHz
⌵
Visibility Status:
Visible
⌵
802.11 Mode: 802.11a/n/ac
⌵
Security Mode:
WPA-PSK/WPA2-PSK
⌵
Wi-Fi Channel: Auto
⌵
Transmission Power: High
⌵
Channel Width: 80 MHz
⌵
Visibility Status: Visible
⌵
WI-FI PROTECTED SETUP
PBC:
Trigger PBC
COPYRIGHT © 2016 D-Link

D-Link DSL-2888A Specifications

General

Ethernet WAN	Yes
SIM card slot	No
WAN connection type	RJ-11
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6E (802.11ax)
Top Wi-Fi standard	Wi-Fi 6E (802.11ax)
WLAN data transfer rate (max)	1600 Mbit/s
WLAN data transfer rate (second band)	300 Mbit/s
Networking standards	IEEE 802.11ac, IEEE 802.11az, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11u, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
RJ-11 ports quantity	1
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	5
Firewall security	Dual Active Firewall
Security algorithms	WPA, WPA2, WPS-PBC, WPS-PIN
Product type	Tabletop router
Product color	Black
Antenna type	3x3
Antennas quantity	3
Output current	2 A
Output voltage	12 V
AC input voltage	100 - 240 V
Power source type	AC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 95 %
Certification	CE, FCC, LVD, RCM

Weight and Dimensions

Depth	37 mm
Width	155 mm
Height	230 mm
Weight	523 g