D-Link DSL-2888A

36D-Link DSL-2888A User Manual
Section 4 - Conguration
IPv6 Settings
Auto Detection
Select Auto Detection to automatically detect the IPv6 connection method used by your
Internet Service Provider (ISP). If Auto Detection fails, you may manually select another IPv6
connection type.
IPv6 Settings:
IPv6PD:
Enable or disable IPv6 prex delegation.
My Internet
Connection is:
Select Auto Detection.
DNS Type:
Select either Obtain DNS server address automatically or Use
the following DNS address.
If you selected Use the following DNS address, the following options are available:
Primary DNS
Server:
Enter the primary DNS server address.
Secondary DNS
Server:
Enter the secondary DNS server address.
Click Save when you are done.
IPv6PD:
Enabled
My Internet Connection is: Auto Detection
⌵
DNS Type: Obtain a DNS server address
⌵
IPv6 SETTINGS
IPv6PD:
Enabled
My Internet Connection is: Auto Detection
⌵
DNS Type: Use the following DNS
⌵
Primary DNS Server:
Secondary DNS Server:
IPv6 SETTINGS