D-Link DSL-2888A - Static Ipv6

37D-Link DSL-2888A User Manual
Section 4 - Conguration
Static IPv6
Select Static IP if your IPv6 information is provided by your Internet Service Provider (ISP).
IPv6 Settings:
IPv6PD:
Enable or disable IPv6 prex delegation.
My Internet
Connection is:
Select Static IPv6.
IPv6 Address:
Enter the address supplied by your ISP.
Subnet Prex
Length:
Enter the subnet prex length supplied by your ISP.
Default Gateway:
Enter the default gateway for your IPv6 connection.
Primary DNS
Server:
Enter the primary DNS server address.
Secondary DNS
Server:
Enter the secondary DNS server address.
Click Save when you are done.
IPv6PD:
Enabled
My Internet Connection is: Static IPv6
⌵
IPv6 Address:
Subnet Prex Length:
Default Gateway:
Primary DNS Server:
Secondary DNS Server:
IPv6 SETTINGS