D-Link DWL-8600AP User Manual

Configuring sFlow
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 154
D-Link UWS User Manual
• Use the Refresh button to refresh the page with the most current data from the switch.
sFlow Receiver Configuration
Use the sFlow Receiver Configuration page to configure the sFlow Receiver.
To access the sFlow Receiver Configuration page, click LAN > Administration > sFlow > Receiver Configuration
in the navigation tree.
Figure 75: sFlow Receiver Configuration
Table 66: sFlow Agent Summary
Field Description
Version Uniquely identifies the version and implementation of this MIB. The version string must have
the following structure: MIB Version;Organization;Software Revision where:
• MIB Version: ‘1.3’, the version of this MIB.
• Organization: D-Link Corporation
• Revision: 1.0
Agent Address The IP address associated with this agent.

D-Link DWL-8600AP Specifications

General

Modulation	DBPSK, DQPSK, DSSS, OFDM
Cabling technology	10/100/1000Base-T(X)
Maximum data transfer rate	300 Mbit/s
Frequency range	2400 - 2497 MHz
Wireless technology	802.11a/b/g/n
Compliance industry standards	IEEE 802.11a, 802.11b, 802.11g, 802.11n, IEEE 802.3, 802.3u, IEEE 802.11d, IEEE 802.11h, IEEE 802.3x, IEEE 802.3af
Antenna connector type	SMA
DC-in jack	Yes
Ethernet LAN (RJ-45) ports	1
AC input voltage	48 V
Power supply type	DC
Power consumption (typical)	12 W
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Certification	-FCC Class B, -CE, -C-Tick, -VCCI, -TELEC, -Wi-Fi, - ICES-003, -EN60601-1-2, -NCC, -CSA.

Weight and Dimensions

Weight	1020 g
Dimensions (WxDxH)	190.5 x 198.8 x 36.8 mm