D-Link DWL-8600AP User Manual

Monitoring Status and Statistics
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 520
D-Link UWS User Manual
Command Buttons
The page includes the following buttons:
• Refresh—Updates the page with the latest information.
• Acknowledge Rogue—Clear the rogue status of the client in the Detected Client database, The status of
an acknowledge client is returned to the status it had when it was first detected. If the detected client fails
any of the tests that classify it as a threat, it will be listed as a Rogue again
Viewing WIDS Client Rogue Classification
The Wireless Intrusion Detection System (WIDS) can help detect intrusion attempts into the wireless network
and take automatic actions to protect the network. The DWS-4000 Series switch allows you to activate or
deactivate various threat detection tests and set threat detection thresholds. The WIDS Client Rogue
Classification page provides information about the results of these tests. If a client has been classified as a
rogue, this page provides information about which tests the client might have failed to trigger the
classification.
To view WIDS information about another client detected through the RF Scan, return to the main Detected
Clients page and click the MAC address of the client with the information to view.
Broadcast BSSID Probes Shows the number of probes to broadcast BSSID in the last RF Scan.
Broadcast SSID Probes Shows the number of probes to broadcast SSID in the last RF Scan.
Specific BSSID Probes Shows the number of probes to a specific BSSID in the last RF Scan.
Specific SSID Probes Shows the number of probes to a specific SSID in the last RF Scan
Last Directed Probe
BSSID
Shows the last directed probe BSSID detected in the RF Scan, which is a MAC address.
Last Directed Probe
SSID
Shows the name of the last directed Probe SSID detected in the RF Scan.
Threat Mitigation Sent Shows the amount of time that has passed since the switch sent the last threat
mitigation message to this client.
Table 309: Detailed Detected Client Status (Cont.)
Field Description

D-Link DWL-8600AP Specifications

General

Modulation	DBPSK, DQPSK, DSSS, OFDM
Cabling technology	10/100/1000Base-T(X)
Maximum data transfer rate	300 Mbit/s
Frequency range	2400 - 2497 MHz
Wireless technology	802.11a/b/g/n
Compliance industry standards	IEEE 802.11a, 802.11b, 802.11g, 802.11n, IEEE 802.3, 802.3u, IEEE 802.11d, IEEE 802.11h, IEEE 802.3x, IEEE 802.3af
Antenna connector type	SMA
DC-in jack	Yes
Ethernet LAN (RJ-45) ports	1
AC input voltage	48 V
Power supply type	DC
Power consumption (typical)	12 W
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Certification	-FCC Class B, -CE, -C-Tick, -VCCI, -TELEC, -Wi-Fi, - ICES-003, -EN60601-1-2, -NCC, -CSA.

Weight and Dimensions

Weight	1020 g
Dimensions (WxDxH)	190.5 x 198.8 x 36.8 mm