D-Link DWL-8600AP User Manual

Loopback Interfaces
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 303
D-Link UWS User Manual
Loopbacks Summary
Use the Loopbacks Summary page to display a summary of configured loopbacks.
To display the page, click LAN > Monitoring > L3 Status > Loopback Summary in the navigation tree.
Figure 193: Loopbacks Summary
• Click Refresh to update the information on the screen.
Table 176: Loopbacks Summary Fields
Field Description
Loopback Interface The ID of the configured loopback interface.
Addresses A list of the addresses configured on the loopback interface.

D-Link DWL-8600AP Specifications

General

Modulation	DBPSK, DQPSK, DSSS, OFDM
Cabling technology	10/100/1000Base-T(X)
Maximum data transfer rate	300 Mbit/s
Frequency range	2400 - 2497 MHz
Wireless technology	802.11a/b/g/n
Compliance industry standards	IEEE 802.11a, 802.11b, 802.11g, 802.11n, IEEE 802.3, 802.3u, IEEE 802.11d, IEEE 802.11h, IEEE 802.3x, IEEE 802.3af
Antenna connector type	SMA
DC-in jack	Yes
Ethernet LAN (RJ-45) ports	1
AC input voltage	48 V
Power supply type	DC
Power consumption (typical)	12 W
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Certification	-FCC Class B, -CE, -C-Tick, -VCCI, -TELEC, -Wi-Fi, - ICES-003, -EN60601-1-2, -NCC, -CSA.

Weight and Dimensions

Weight	1020 g
Dimensions (WxDxH)	190.5 x 198.8 x 36.8 mm