D-Link DWL-8600AP User Manual

Port Access Control
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 433
D-Link UWS User Manual
Port Access Privileges
Use the Port Access Control Privileges page to grant or deny port access to users configured on the system.
To access the Port Based Access Control Privileges page, click LAN > Security > Port Access Control > Port
Access Privileges in the navigation menu.
Figure 300: Port Access Privileges
Table 255: Port Access Privileges Fields
Field Description
Port Selects the port to grant or deny access. To grant or deny port access
privileges to a user on all ports, select All from the drop-down menu.
Users Lists the users configured on the system. The users that are highlighted have
access to the selected port. By default, all users have access to all ports. To
deny access to a port, Shift + click to select only the users to allow access.
Make sure the username to deny port access is not selected, and then click
Submit.

D-Link DWL-8600AP Specifications

General

Modulation	DBPSK, DQPSK, DSSS, OFDM
Cabling technology	10/100/1000Base-T(X)
Maximum data transfer rate	300 Mbit/s
Frequency range	2400 - 2497 MHz
Wireless technology	802.11a/b/g/n
Compliance industry standards	IEEE 802.11a, 802.11b, 802.11g, 802.11n, IEEE 802.3, 802.3u, IEEE 802.11d, IEEE 802.11h, IEEE 802.3x, IEEE 802.3af
Antenna connector type	SMA
DC-in jack	Yes
Ethernet LAN (RJ-45) ports	1
AC input voltage	48 V
Power supply type	DC
Power consumption (typical)	12 W
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Certification	-FCC Class B, -CE, -C-Tick, -VCCI, -TELEC, -Wi-Fi, - ICES-003, -EN60601-1-2, -NCC, -CSA.

Weight and Dimensions

Weight	1020 g
Dimensions (WxDxH)	190.5 x 198.8 x 36.8 mm