Detecting and Preventing Wireless Intrusion
D-Link Unified Wired and Wireless Access System
July 2012 Page 737
D-Link UWS User Manual
If an employee using Tablet_5 attempts to use an unknown AP with one of the tablets, the DWS-4000
Series switch initiates a Client Threat Mitigation attack. The WLAN > Monitoring > Client > Detected Clients
page shows that the Tablet_5 client now has a client status of Rogue.
Click the MAC address of the client to display the client’s Detected Client Status page. As the following
figure shows, the client is detected as a threat, and the threat mitigation feature caused the AP to send a
deauthentication request to the client. Traffic transmitted by the rogue tablet is interrupted, and it is not
able to remain associated with the unknown AP.
To Next Page
Loading...
