To Next Page

To Previous Page

13-4

FRONT WHEEL/FRONT FORK/STEERING

INSTALLATION

● Align the line of the steering handle to the handle under

holder.

● Install the handle upper holder using the hexbolt, to the

specified torgue.

TORQUE : 3.92 - 4.9

㎏

● Install in the reverse order of removal.

FRONT WHEEL

REMOVAL

● Jack the motorcycle front wheel off the ground.

● Loosen the flange bolt securing the front caliper to

remove the caliper.

● Loosen the axle nut, speedometer cable setting screw

and remove the wheel.

INSPECTION

AXLE RUNOUT

● Set the axle in V blocks and measure the runout using a

dial gauge.

● The actual runout is 1/2 of the total indicator reading.

SERVICE LIMIT : 0.2mm replace if over

FRONT CALIPER

FRONT AXLE

DIAL GAUGE

FLANGE BOLT

HANDLE UPPER HOLDER

STEERING HANDLE

HANDLE UNDER HOLDER

Adjust the throttle grip free play to the

specified range of 2-6mm.

NOTE

DAELIM B-BONE Service Manual

Other manuals for DAELIM B-BONE