Web Operation Manual
23
Parameter Description
Picture
Scene
You can change the scene and adjust the sharpness of the corresponding scene.
Scenes available: Dawn/Dusk, Daytime, and Night.
Sharpness
You can set the sharpness of the corresponding scene.
The higher the value, the clearer the image. But there will be noise if the sharpness
is too high.
WDR
Select On to enable WDR (wide dynamic range), which helps provide clear video
images in bright and dark light.
Exposure
Mode
In Auto mode, only Manual iris type is available.
In Force
mode, several iris types are available, and you also need to
configure the Iris Adjust Mode, which includes: Auto and Manual. If
Manual is selected, you can manually drag the slider to adjust the value.
Iris Type Displays the detected iris type.
Mode
Select the way of adjusting exposure mode. You can select from Manual and Auto.
Shutter
You can select the shutter value, or select Customized Range, and then set
the shutter range.
You need to configure shutter when Mode is set to Manual.
Shutter Scope
Set the time range of shutter.
You need to configure shutter when Shutter is set to Customized Range.
Gain Scope
Set the value range of gain.
You need to configure gain scope when Mode is set to Manual.
WB
Mode
Set scene mode to adjust the image to its best status.
Click OK. Step 3
5.1.1.3 Configuring Metering Zone
This section provides guidance on setting the measure mode of metering zone.
Select Setting > Camera > Camera Attribute > Metering Zone. Step 1
To Next Page
Loading...