Figure 8-28
How to use keyboard to set Tour
a) Select set item, the interface is shown as in Figure 8-29.
Figure 8-29
b) Input a value at the tour No.
c) Add preset to the tour.
Select preset No. and then input a preset number.
Select preset add and then click 【ENTER】 to confirm. Now the preset is
added to the tour.
How to use keyboard to call Tour
Select tour and then input tour number.
Select start and then click 【ENTER】, system begins tour.
Select stop and then click 【ENTER】,system stops tour.
Select delete and then click 【ENTER】, system removes the tour.
Pattern
On the keyboard click 【PATTERN】, the interface is shown as below. See Figure 8-30.
Figure 8-30
How to use keyboard to set pattern
1) Select tour number and then input a value.
2) Select tour set button and then click 【ENTER】 button.
3) Use joystick to set pattern and then click 【ENTER】 to end. The speed dome can
memorize your whole operation.
How to use keyboard to start and stop pattern
1) Select tour No. and then input a tour number, select start and then click 【ENTER】
button, system begins pattern operation.
2) Select tour No. and then input a tour number, select stop and then click 【ENTER】
button, system stops pattern operation.
To Next Page
Loading...
Need help?
General