Dahua TPC-BF1241-B3F4-S2 - Page 135

129
Isotherm
Select the On check box.
You have to make sure that floor temperature <= median temperature
<= ceiling temperature <= saturation temperature.
Min Limit
Temperature
When gain mode is under low-temperature mode, value ranges 
from -40 °C to 150 °C.
When gain mode is under high-temperature mode, value ranges 
from -40 °C to 600 °C.
Medium
Temperature
When gain mode is under low-temperature mode, value ranges 
from -40 °C to 160 °C.
When gain mode is under high-temperature mode, value ranges 
from -40 °C to 600 °C.
Max Limit
Temperature
When gain mode is under low-temperature mode, value ranges 
from -40 °C to 160 °C.
When gain mode is under high-temperature mode, value ranges 
from -40 °C to 600 °C.
Saturation
Temperature
When gain mode is under low-temperature mode, value ranges 
from -40°C to 160℃.
When gain mode is under high-temperature mode, value ranges 
from -40 °C to 600 °C.
Color Code
Select On to enable color code.
A color code will be represented on the right side of surveillance
images.
Click Save. Step 3
Effect images are as shown in Figure 4-73, Figure 4-74, and Figure 4-75.
Temperature switch Figure 4-73