140
“"”, “;”, “:”, and “&” are not covered in special characters.) Administrator users can modify all the
uses’ password.
You can have 19 users and 8 groups at most.
You can manage users through single user or group, duplicate user names or group names are
not allowed. A user can be in one group at a time and the group users can own authorities
within group authority range.
Online users cannot modify their own authority.
There is one admin by default which has highest authority.
Select “Anonymous login”, and then log in with only IP address instead of user name and
password. Anonymous users only have preview authorities. During Anonymous login, Click
logout, and then you can log in with other username.
4.8.2.1 Adding a Group
You have two groups named admin and user by default, you can add new group, delete added
group or modify group authority and memo.
Select Setting > System > Account > Account > Group Name. Step 1
The Group Name interface is displayed. See Figure 4-90.
User group Figure 4-90
Click Add Group. Step 2
The Add Group interface is displayed. See Figure 4-91.
Add Group Figure 4-91
Enter Group name and memo. Then select Group authorities. Step 3
Click Save. Step 4
The newly added group displays in the group name list. See Figure 4-92.
To Next Page
Loading...
Need help?
General