30
Power up Figure 3-22
Select the Enable check box. Step 2
Select the Power Up actions. Step 3
Select Auto and the PTZ will continue to implement the action before the power is off.
Click Save. Step 4
3.2.2.2.9 Configuring Time Task
You can configure a time task and let camera implement certain actions within the period you have
set.
Preparation
You have configured preset, tour, scan and pattern before configuring time task.
Procedure
Select Setting > PTZ > Function > Time Task. Step 1
The Time Task interface is displayed. See Figure 3-23.
To Next Page
Loading...