54
Restoring lens to the default settings Figure 4-8
4.1.1.2 Configuring Thermal Image
To find and configure thermal image, you need to select Setting> Camera > Conditions >
Conditions first, and in the Channel box, select 2. See the following steps.
Configure a specific scenario where you use the camera, including indoor scenario, outdoor scenario,
and adaptive scenario. You can choose a scenario you need, and configure and check the scenario.
Select Setting> Camera > Conditions > Conditions. Step 1
The Conditions interface is displayed.
In the Channel box, select 2. Step 2
The thermal image interface is displayed. See Figure 4-9.
The thermal image interface might vary with different cameras, and the actual product shall
prevail.
To Next Page
Loading...