55
The thermal image interface Figure 4-9
Configure lens parameters. See Table 4-8. Step 3
Table 4-8 Parameter description of lens
Classification Parameter Description
Profile
Profile
Normal, Day and Night can be selected.
Scene (marked by
① in Figure 4-9)
Select the duplicate frame and set the frequently used video
parameter as the user-defined scene. Or, you can select the
default scene and set the display of the thermal image.
Low Dynamic: Thermal images will be displayed based
on the configuration of low dynamic scene.
High Dynamic: Thermal images will be displayed based
on the configuration of high dynamic scene.
Auto: Thermal images will be displayed based on the
configuration of auto scene.
To Next Page
Loading...