Daihen OTC Almega AX Series User Manual

3.4 Creating the setup data
3-11
3
Select the backup you created in "3.3.3 Creating a backup".
4
Select the backup folder.
>> The backup data of the robot controller is loaded from the selected backup folder,
and "Welding Interface (Digital) Setup" starts.
INFO.
The name of the backup folder is given automatically using the following format.
NRA2001-20
12
-12-20-1200
Date
Time

Daihen OTC Almega AX Series Specifications

General

Brand	Daihen
Model	OTC Almega AX Series
Category	Welding Accessories
Language	English