18
Screen 1 Monitoring
1.
On Screen 1 Monitoring, select a zone
or a group from the button 1 .
Switch the operation mode of the air
conditioner.
On the Monitoring screen, operation is
allowed with either Icon or List as the display
type.
The operation mode can be switched by
zone or by group.
Selecting a zone and switching the operation
mode switches the mode of
all air conditioners in the zone.
Selecting a group and switching the
operation mode switches the mode of air
conditioners in the group selected.
Ex.: For the following zone setting, the
operation modes available are Fan,
Cool, Heat and Auto.
If Cool/Heat option is not available for
any air conditioner in the zone, Fan and
Set Point are the available operation
modes.
2.
Select with 2 a zone or a group of
which the operation mode is to be
switched.
3.
Press the [Set] button 3 .
Screen 2 Operation appears.
4.
Select the operation mode to be set
from the pull down menu 4 .
5.
Switching the Operation Mode
Screen 2 Operation
3
2
5
1
4
To cancel the setting, press the
Cancel button.
On the menu, operation modes
available for air conditioners in the
zone are displayed if the switching
is to be made by zone. See the
example below.
Press the [OK] button 5 .
Zone name Group name
Operation modes available
Canteen
1F North
1F West
[Procedure]
“Cool” “Heat”
“Auto” “Air”
“Cool” “Air”
To Next Page
Loading...
