Daikin DCS601C51 - Features and Functions; Operation Menu

4
Features and Functions
■ Operation Menu
intelligent Touch Controller is capable of starting / stopping of the operation by
the group or zone. Collective starting / stopping is also available.
■ Air Conditioner Detail Setup
Temperature setting, switching between temperature control modes, switching of
speed and direction of wind and remote control mode setting are available by the
group, by the zone or collectively.
■ Monitoring of Various Information on Indoor Units
Information on operation such as the operation mode and temperature setting of
the indoor units, maintenance information including the filter or element cleaning
sign, troubleshooting information such as error codes can be displayed by the
group or the zone.
■ Zone Control Simplifying Complicated Setting Operations
Up to 64 groups can be controlled with the intelligent Touch Controller.
More than one group can be consolidated into a zone, which can be registered, to
allow the following settings by the zone. This eliminates the need for repeating the
same setting operation for each group. Function to allow collective setting for all
groups is also available.
■ Detailed Scheduled Operation Control
The intelligent Touch Controller allows detailed scheduled operation by the group,
by the zone or collectively. Up to 8 options for annual schedule can be set. Each
schedule can include four types of plans : for Weekdays, Holidays, Special days 1
and Special days 2. Each of the plans allows setting of up to 16 operations.
■ Diversified Operation Modes
Operation can be controlled both with the main unit and the remote control to
provide diversified operation management. Setting with the main unit allows the
following remote control settings by the group, by the zone or collectively:
1. Start/Stop 2. Operation Mode 3.Temperature Setting
: (Remote control) Inhibited
: (Remote control) Inhibited
: (Remote control) Inhibited
: (Remote control) Permitted
: (Remote control) Permitted : (Remote control) Permitted
: Priority
• Start / stop
• Temperature setting
• Switching between operation modes
• Setting of direction and fan speed
• Disabling / enabling the remote control
See pages
15 17
to
See pages
18 22
to
See pages
26 29
to
See page
22
See pages
15 29
to
33
See pages
35 36
to
See pages
37 46
to
■ Handy Automated Control
The Intelligent Touch Controller can do the following.
• Change Over Settings : automatically switches between cooling and heating
according to the room temperature.
• Temperature Limit Settings : prevents the temperature from rising too high or
too low in unmanned rooms.
• Heating Optimization Settings : stops uncomfortable hot air from blowing when
the heating thermo is off.