20
Screen 1 Monitoring
1.
On Screen 1 Monitoring, select a zone
or a group from the button 1 .
Reset the filter or element sign after
cleaning any air conditioner showing the
filter or element sign.
On the Monitoring screen, operation is
allowed with either Icon or List as the display
type.
The filter or element sign can be reset by
zone or by group.
2.
Select a zone or a group of which the
filter or element sign is to be reset 2 .
3.
Press the [Set] button 3 .
Screen 2 Operation appears.
4.
Press the [Advanced Operation] button 4
.
Screen 3 Advance
Operation
appears.
5.
To reset the filter / element sign, select
"Filter Sign Reset" in pull-down menu 5
.
Then press the
[
OK
]
button 6 .
To cancel the setting, press the
[
Cancel
]
button.
Screen 2 Operation reappears.
Resetting the Filter / Element Sign
Screen 2 Operation
6.
1
2
3
4
5
7
6
Screen 3 Advanced Operation
To cancel the setting, press the
[
Cancel
]
button.
Then press the
[
OK
]
button 7 on Screen
2 Operation.
[Procedure]
To Next Page
Loading...
