1.
Select “Schedule Setup” according to the
operating procedure shown in page 56.
∗ When it is necessary to resume a calendar
setting made for schedule 1, this function
greatly helps you copy the calendar setting
to the other schedule(s).
Example :
When reusing the same calendar setting
(such as the summer holiday) for the other
schedule, make the calendar setting for
schedule 1, then copy it for the other
schedule to eliminate the efforts required
for making the same setting for each of the
other schedules.
2.
Confirm that the schedule setup screen
Screen 1 will be displayed as shown in
the left-hand column.
3.
Push the [Edit Schedules] button 2 to
display the data manipulation screen
Screen 2.
(For setup item copy)
Select a schedule for a copy source at 3
and that for a copy destination at 4 . In
an example of the left-hand column, the
schedule of the copy source is schedule
1 and that of the copy destination
schedule 2. Next, select the setup item
(to be copied) of schedule 1 from the
pull-down menu 5 . The following setup
items can be selected.
• Overwriting all setup items
•
Overwriting only the calendar setup item
After selecting either of the above items,
push the [Apply] button 6 . Last, push
the [OK] button 7 to terminate the copy
procedure. To cancel the settings made,
push the [Cancel] button 8 and return to
the schedule setup screen Screen 1.
(For setup item deletion)
Select the schedule to be deleted at 4 .
Next, select the setup item to be deleted
from the pull-down menu 5 . The
following setup items can be selected.
• Delete all the setup items
• Delete only the calendar setup item
After selecting either of the above setup
items, push the [Apply] button 6 . Last,
push the [OK] button 7 . To cancel the
settings made, push the [Cancel] button
8 and return to the schedule setup
screen Screen 1.
Screen 1 Schedule Setup
Screen 2 Data Manipulation
2
1
3
4
7 8
5 6
Convenient Function 2
Copy or Delete in Units of Schedules
System Setup Menu Operation
72
To Next Page
Loading...
Need help?
General
