Daikin DCS601C51 - Monitor Ventilation Status of a Zone or Group in Detail

30
Screen 1 Monitoring (Icon)
Screen 2 Set
Screen 3 Advanced Operation
3
Monitoring Detailed Information
1
4
5
6
10
7
8
9
2
Monitor Ventilation Status of a zone or group in Detail
When monitoring the operation status in detail,
you may choose any of three display types,
icon, detailed icon and list.
You may monitor the details of the operation
status in units of zones or groups.
The following describes in order the
contents of display data on Screen 2.
The grayed characters 4 and 5
indicate the current status of the
selected zone or group.
The following data is displayed on the
screen of the left-hand column.
Ventilation mode : Heat Exchange
Ventilation volume :
Strong (Fresh up)
The following describes in order the
contents of display data on the
Advanced Operation screen Screen 3.
∗ Display data on Screens 2 and 3 is updated
each time the respective screens are
displayed. Once these screens are
displayed, data is not updated unless they
are closed and opened again.
1.
Select either Zone or Group by pushing
the button 1 .
Note that screens in the left-hand
column are examples for group lection.
Push [Set] button 2 to display the
Operation Screen Screen 2.
2.
Push the [Advanced Operation] button
6 to display the Advanced Operation
screen Screen 3.
To return to the Monitoring Screen
Screen 1, push [Cancel] button
10 .
7 displays the settings made for start-
or stop-related remote control
operations.
Prohibited, Stop Only or Permitted is
displayed.
8 displays a filter sign.
ON or OFF is displayed.
3.
Check for display data and push
[Cancel] button 9 .
4.