Daikin DCS601C51 - Set Ventilation Volume

24
Screen 1 Monitoring
Screen 2 Set
Set Ventilation Volume
1
4
5
3
2
1.
On the Monitoring Screen Screen 1,
select a zone or group by pushing the
button 1 .
∗ Note that some models of ventilation
systems permit you to make the above
settings but the others don’t.
2.
To select a zone or group subject to
ventilation volume switching, push the
icon 2 .
3.
4.
Select a desired ventilation volume on
the pull-down menu 4 .
5.
Lastly, push [OK] button 5 .
To cancel above settings, press
[Cancel] button.
[Procedure]
Push [Set] button 3 to display the Set
Screen Screen 2.
Perform the following procedure to change
the ventilation volume.
For this operation, you can select any of
three display types, icon, detailed icon and
list on the monitoring screen.
When changing the ventilation volumes of all
the ventilation groups of a zone, select the
zone and switch the ventilation volume.
When changing the ventilation volume of a
group, select the group and switch the
ventilation volume.