Daikin DCS601C51 - Set Ventilation Mode

23
Screen 1 Monitoring (Icon)
Screen 2 Set
1
4
5
3
2
1.
On Monitoring Screen Screen 1, select
a zone or group by pushing the button 1 .
Perform the following procedure to switch
the ventilation mode.
For this operation, you can select any of
three display types, icon, detailed icon and
list on the monitoring screen
When changing the ventilation modes of all
the ventilation groups of a zone, select the
zone and switch the ventilation mode.
When changing the ventilation mode of a
group, select the group and switch the
ventilation mode.
∗
N ote that some models of ventilation
systems permit you to make the above
settings but the others don’t.
2.
To select a zone or group subject to
ventilation mode switching, push the icon 2 .
3.
4.
Select a desired ventilation mode on
the pull-down menu 4 .
5.
Last, press [OK] button 5 .
To cancel above settings, press
[Cancel] button.
[Procedure]
Push [Set] button 3 to display Set
Screen Screen 2.
Set Ventilation Mode