1.
Select “Schedule setting” according to
the operating procedure shown in page 56.
Before setting a calendar, refer to page 35
to consider what kind of schedule is to be
set and perform the following operations.
The following shows an example of setting
made referring to zone 2 in page35.
This example shows the setting that
determines which days in the year schedule
to use for special days (such as the
summer holidays) requiring air-conditioner
control different from that in the regular
weekly schedule.
2.
Confirm that the Schedule setting
screen Screen 1 will be displayed as
shown in the left-hand column.
3.
Select a schedule from 1 to set or
change the calendar.
4.
Push the [Calendar Setup] button 2 to
display the calendar setup screen
Screen 2. Initially, the weekly settings
are made. Select a month for change at
3 and a day for change at 4 . Then,
select a pattern for the selected day
from 5 .
∗ Check a Set checkbox to display a
radio button for each pattern.
This setting can be made for the
coming 13 months.
5.
After making the necessary settings,
push the [OK] button 6 and return to
the Schedule setup screen Screen 1.
Set Schedule and Calendar
Screen 1 Schedule Setup
Screen 2 Calendar Setup
1
3 3
2
6
4
5
System Setup Menu Operation
66
To Next Page
Loading...
