Daikin DCS601C51 - Check for History

Screen 1 History
Screen 2 Operation History
Screen 3 Automatic control history
1.
Select “History” by using the operation
method described on page 56.
2.
The History screen Screen 1 appears
as shown in the left-hand column.
3.
4.
To return to the History screen, touch the
[Close] button 5 .
5.
When checking for the history of
automatic control operations, touch the
[Auto-control history] button 2 to
confirm that the Automatic control
history screen Screen 3 is displayed.
6.
Use the pulldown menu 6 to display
the following items on the related
screens :
• Schedule History
Use this item to display log records on
schedule execution.
• Heating opt. Cntl. History
Use this item to display log records on
optimal stop control during heating.
• Temp. limit func. History
Use this item to display log records on upper-
/ lower-limit control for the room temperature.
• Simple linkage history
∗
When purchasing option soft, items shown
below are displayed in the pulldown menu 6
in addition to those shown above.
• Power prop. division History
• E-mail History
∗
4 items shown above except the item "Power
prop. division History" disappear when
turning off the power of the contoroller.
7.
To return to the History screen Screen
1, touch the [Close] button 7 .
9.
After checking the log record, touch the
[Close] button 4 .
8.
When saving the stored log records in a
memory card, insert a commercially
available PCMCIA flash memory card into a
slot provided at the left side of the controller
and touch the [Output in file] button 3
.
∗ Care should be taken for memory card
insertion. Be sure to insert a memory
card in such a way that the rear side
of the card (not provided with a label
for the manufacturer name and model
name) should face upwards.
When the memory card has been
forcibly inserted in wrong direction,
the controller may be damaged.
Then, touch the [OK] button to save the
log records in the memory card.
Check for History
1
6
2
3
5
4
7
When checking for the history of
system setup operations, touch the
[Operation History] button 1 to confirm
that the Operation history screen
Screen 2 is displayed. The system
setup operations recorded in the
controller are displayed in the order
where they have been performed.
System Setup Menu Operation
76