89
System Compulsory Stop
indication?
Is the indication System Compulsory Stop on the Monitoring
screen, as shown below?
This indication is shown in the following cases.
When compulsory stop command is input to central management
devices (central remote controller, ON / OFF controller, etc.)
including the intelligent Touch Controller, the indication appears.
Inputting compulsory command stops all air conditioners
connected to the central management device. While the
command is input, neither the central management devices nor
remote control can operate air conditioners.
When the compulsory stop input command is canceled, the
System Compulsory Stop disappears, which allows control with
the intelligent Touch Controller.
Item Description and Corrective Action
Collective Operation, Start and
Stop buttons are not shown on
the Monitoring screen of the
intelligent Touch Controller and
operation of air conditioners is
made impossible.
Before Having the Product Serviced
To Next Page
Loading...
