Input Meters
The 442 provides the user with four independent 12 segment lightpipe™ input meters that range
from -30 to +22 dBu. Note: These meters are calibrated for the +22dBu setting of the gain
jumpers.
Threshold Meters
The threshold meters indicate that the threshold level has been exceeded within the dynamics
section (compressor/limiter), and gain reduction is taking place within the specific output chan-
nel.
Output Meters
The 442 DriveRack™ provides the user with four independent 12-segment lightpipe™ output
meters that range from -30 to +22 dBu. Note: These meters are calibrated for the +22dBu set-
ting of the gain jumpers.
Output Mutes
The four output mute buttons are used for independently muting each output of the 442
DriveRack™.
Power Switch
Turns the 442 DriveRack™ on and off. Note: dbx Professional Products recommends that power
amps connected to the DriveRack™ should be powered down prior to cycling the DriveRack™.
Getting Started
SECTION 1
DriveRack
™
11
DriveRack™ User Manual
To Next Page
Loading...
