Navigating the "Delay" Section
The PARAMETER knobs are used
to edit parameter values
1
2 3
The DELAY button
toggles through
the Delay
modules used in
each channel of
the selected
program
menu.
DLY
DLY
Speaker Alignment Delay (Post X-OVER)
To edit the parameters of the Delay and Speaker Alignment Delay used in a selected program, simply use the following procedure.
From program mode, either press the DELAY button or use the Parameter 2 or 3 knobs to move to Delay module to be edited.
Navigate through the Pages of the selected Delay module by depressing the "Next Page" or "Prev Page"
buttons successively until arriving at the desired Page.
Delay On/Off
Type
Length
DELAY
DELAY
Delay On/Off
Type
Length
To Next Page
Loading...
